YOUNG 05103 WIND MONITOR

YOUNG 05103 WIND MONITOR

Specification

  • Manufacturer: Young
  • Model: 05103
  • Type: Wind Monitor
  • Condition: Used
Categories: ,

Description

Manufacturer: Young 

Model: 05103

Type: Wind Monitor

Condition: Used

 

TECHNICAL SPECIFICATIONS:

Range: Wind speed: 0-100 m/s (224 mph)
Azimuth: 360° mechanical, 355° electrical (5° open)

Accuracy: Wind speed: ± 0.3 m/s (0.6 mph) or 1% of reading
Wind direction: ± 3°

Threshold: Propeller: 1.0 m/s (2.2 mph)
Vane: 1.1 m/s (2.4 mph)

Dynamic Response: Propeller distance constant (63% recovery): 2.7 m (8.9 ft)
Vane delay distance (50% recovery): 1.3 m (4.3 ft)
Damping ratio: 0.3
Damped natural wavelength: 7.4 m (24.3 ft)
Undamped natural wavelength: 7.2 m (23.6 ft)

Signal Output: Wind speed: magnetically induced AC voltage, 3 pulses per revolution. 1800 rpm (90 Hz) = 8.8 m/s (19.7 mph)
Wind direction: DC voltage from conductive plastic potentiometer − resistance 10K Ω, linearity 0.25%, life expectancy − 50 million revolutions

Power Requirement: Potentiometer excitation: 15 VDC maximum

Operating Temperature: -50 to 50°C

Dimensions(in): 14.6×11.7×7

Weight: 1.0 kg

 

Maritek Solutions can supply new and refurbished parts of Young Wind Monitor.

To receive a quote for any Marine Young Wind Monitor, Kindly email us at sales@mariteksolutions.com

Technical Data

The YOUNG Model 05103 Wind Monitor measures horizontal wind speed and direction.

Originally developed for ocean data buoy use it is rugged and corrosion resistant, yet accurate and light weight.

A four-blade helicoid propeller, used to measure wind speed, generates an AC sine wave signal upon rotation.

Wind direction is determined by a vane attached to a precision potentiometer inside an internal housing.

UV stabilized plastic with stainless steel and anodized aluminum parts are used in the construction of the sensor.

Precision grade stainless steel ball bearings with light contacting Teflon seals and a wide temperature grease are used to help exclude contamination.

The sensor mounts on a standard 1-inch IPS pipe.

A mounting orientation ring is included that engages with the base of the sensor to retain orientation when the sensor is removed for maintenance.

Terminations are made in a junction box at the base of the sensor by small clamp-style connectors (no special connectors are required).

Go to top