HD 27T22 MMD 27.0”, 1920 x 1080, 16:9, FHD 3000:1, 300 cd/m², 89° (L/R/U/D) 100-240VAC + 24VDC – 44W Max Connectivity / Size: 2 x DVI-I, 1 x DP1.2, 1 x VGA OUT, 2 x Comp. Video (BNC) – W:650.00 x H:437.00 x D:69.50 mm To receive a quote for Marine display, Kindly email us at sales@mariteksolutions.com Read More "Hatteland MMD Series Marine Display"
Furuno MU-190 Marine Display
The FURUNO MU-190 Marine Display is a multi-purpose display that features the unmatched Furuno quality and reliability that you have learned to depend on. This 19″ color monitor features a wide range of interface capabilities that will accommodate virtually all of your marine display needs. The MU-190 employs bright color TFT LCDs with a special AR (anti-reflective) glass filter to cut down on annoying glare. With its bright colors, excellent contrast and wide viewing angles, the monitor is perfect for any tropical sunlight or low light conditions. Features Crystal clear 19″ marine grade monitor for use as main or remote display Resolution: 1280 x 1024 SXGA Any of the three NTSC inputs are PIP (Picture-In-Picture) capable, with adjustable size and screen location Table top/Ceiling or Flush Mount Customizable input names for easy on-the-fly identification and switching between onboard Radar, Sonar, Sounder, Camera, etc. Automatic signal recognition and scaling for easy setup and installation Flush mounting For space-saving installation and additional security, flush mount installation is available for the MU-190. The display unit can be fixed from either front or rear with the flush mount kit. To receive a quote for Marine Navigation display, Kindly email us at sales@mariteksolutions.com Read More "Furuno MU-190 Marine Display"
Furuno MU-231 Marine Display
The FURUNO MU-231 is a multi-purpose display that features the unmatched FURUNO quality and reliability that you have learned to depend on. This 23.1″ color monitor features a wide range of interface capabilities that will accommodate virtually all of your marine display needs. The MU-231 employs bright color TFT LCDs with a special AR (anti-reflective) glass filter to cut down on annoying glare. With its bright colors, excellent contrast and wide viewing angles, the monitor is perfect for any tropical sunlight or low light conditions. Features Crystal clear 23.1″ marine grade monitor for use as main or remote display Resolution: 1600 x 1200 UXGA Any of the three NTSC inputs are PIP (Picture-In-Picture) capable, with adjustable size and screen location Table top, Ceiling or Flush Mount Customizable input names for easy on-the-fly identification and switching between onboard Radar, Sonar, Sounder, Camera, etc. Automatic signal recognition and scaling for easy setup and installation Flush mounting For space-saving installation and additional security, flush mount installation is available for the MU-231. The display unit can be fixed from either front or rear with the flush mount kit. To receive a quote for Marine Navigation display, Kindly email us at sales@mariteksolutions.com Read More "Furuno MU-231 Marine Display"
Simrad M5000 Series Marine Monitors
Simrad M5000 Series marine monitors are available in 16, 19, 24 and 27-inch widescreen sizes, and are IEC62388 ed.1 compliant for use as part of a type-approved Simrad radarsystem. The 24-inch M5024 and 27-inch M5027 are also IHO S-52 colour calibrated for ECDIS use, and forms part of the type-approved Simrad ECDIS system. HD/Full HD Widescreen The M5016 (16-inch) and M5019 (19-inch) monitors have a native resolution of 1366 x 768 pixels, in 16:9 widescreen ratio suitable for use with widescreen-optimised Simrad radar systems. The M5024 (24 inch) and M5027 (27 inch) monitors have a ‘Full HD’ native resolution of 1920 x 1080, in the same 16:9 ratio. All M5000 series displays feature an adjustable backlight with maximum 300-nit brightness suitable for pilothouse use. Flush-Mount Installation Ideal for flush-mount installation in a pilothouse or bridge console, all monitor sizes in the M5000 Series have a low profile of just 8mm. Flush mounting is possible with the included rear brackets or front screws, and VESA mounting is supported with an optional bracket. All-Glass Look, Optically Bonded A seamless glass front panel incorporating capacitive touch-sensitive menu keys offers a clean and distraction-free look, and is suitable for side-by-side mounting of multiple displays without the interruption of raised bezels or controls. M5000 Series monitors feature an LCD panel optically bonded to the display’s glass surface to eliminate fogging, while Anti-Reflective and Anti-Fingerprint coatings help to deliver optimal visibility in all conditions Main Features 15.6/18.5/24/27” LCD panel in 16:9 widescreen format High-resolution 1366 x 768-pixel display (M5016 & M5019) Full HD resolution 1920 x 1080-pixel display (M5024 & M527) Suitable for use as part of a type-approved Simrad radar system (IEC62388 ed.1 compliant) Suitable for use as part of a type-approved Simrad E5000 ECDIS system (IHO S-52 colour calibrated) (M5024 & M5027) Optically bonded to eliminate fogging Low profile (8mm) flush-mount installation All-glass front panel with touch sensitive menu keys IP66 water resistant when flush mounted To receive a quote for Marine Navigation display, Kindly email us at sales@mariteksolutions.com Read More "Simrad M5000 Series Marine Monitors"
MU-270W Marine Monitor
The MU-270W is a new 27”, wide-screen, IMO type-approved monitor that features the unmatched quality and reliability that you have learned to depend on. The MU-270W supports a variety of resolutions up to 1920×1200 (WUXGA), and is also compatible with 1920×1080 (Full HD) thanks to a built-in scaler. The high contrast ratio offers a clear image at day, dusk, and night operation. The control keys on the front panel are made of touch sensors instead of rubber keys. The fully flat front panel enhances the visual impression of the bridge for a stylish and sophisticated installation. The display may be used as either the main or remote display for a variety of marine equipment, such as Black Box Radar, Chart Radar or ECDIS. Features Picture in Picture (PIP) Low power consumption Slim, lightweight, and compact To receive a quote for Marine Navigation display, Kindly email us at sales@mariteksolutions.com Read More "MU-270W Marine Monitor"
NOV Single Pointer Indicators GM6A-Series, bracket mount GM6AP-Series, panel mount
Provides quick, accurate checks on mud pump operation; helps detect washed out drill pipe or bit nozzle problems. • Indicator gauges can be mounted in the weight indicator box, driller’s console or locally on the mud pump. • Full 360° dial calibration for maximum pointer movement; shows the smallest pressure changes. • Fluid filled gauge has large, easy-to-read 6” dial face and high pressure damper adjust. • Rugged E17-152 Diaphragm Protector mounts with 2” NPT sub. • Hose lengths to 50 feet are standard; longer lengths available in some pressure ranges. Standard capacities • 3,000, 5,000, 6,000, 10,000 and 15,000 psi • 210, 350, 420, 700 and 1000 kg/cm2 • 10K, 21K, 42K, 70K, 80K KPa • 21, 35, 42, 70, 100 MPa To receive a quote for NOV Single pointer indicators, Kindly email us at sales@mariteksolutions.com Read More "NOV Single Pointer Indicators GM6A-Series, bracket mount GM6AP-Series, panel mount"
NOV TRU-VUE Unitized Pressure Gauge GM14-Series
NOV has the only mud pressure gauge that can be read easily from 75 feet and more away. • Rugged yet precise bourdon tube and movement indicator offers unmatched performance for standpipe and local pressure manifold applications. • Valuable for blowout prevention and cementing, fracturing, acidizing and gravel packing trucks. • Integral adjustable damper for eliminating pointer oscillations. • Fluid filled case for movement lubrication and pointer dampening. To receive a quote for NOV Unitized Pressure Gauge, Kindly email us at sales@mariteksolutions.com Read More "NOV TRU-VUE Unitized Pressure Gauge GM14-Series"
NOV Anchor Type Weight Indicators AWE Series
The hydraulic deadline anchor type weight indicator is a standard of the industry, and NOV weight indicators set the standards for quality, accuracy, and reliability against which all others are judged. NOV has weight indicator models designed to work in conjunction with all industry-standard deadline anchors using either tension or compression hydraulic load cells. Indicator systems are supplied as either portable box-mount instrument systems or panel mounted as part of a driller’s console. Each system accurately senses tension in the deadline and uses this to indicate hook load and weight on bit. Many models have separate pointers for both hook load and weight on bit. In addition, integral circular hydraulic recorders are also offered on several models. Type 200, AWE-Series • For deadline loads to 200,000 lbs. Type 150, AWE-Series • For deadline loads to 150,000 lbs. Type 125, AWE-Series • For deadline loads to 125,000 lbs. Type EB, AWE-Series • For deadline loads to 100,000 lbs. Type E, AWE-Series • For deadline loads to 75,000 lbs. Type D, AW-Series • For deadline loads to 50,000 lbs. Type FS, AWA-Series • For deadline loads to 40,000 lbs. Type G, AWG-Series • For deadline loads to 30,000 lbs. To receive a quote for NOV Weight indicators, Kindly email us at sales@mariteksolutions.com Read More "NOV Anchor Type Weight Indicators AWE Series"
Ingersoll Rand PS2-10000H Series Liftstar and Pullstar Hydraulic Winches
Durability Rugged cast iron and steel construction delivers long-life Minimum 18:1 drum diameter to wire rope diameter reduces wire rope wear Safety Lever control allows for precise positioning Built-in handles and compact design make carrying easy (portable) Performance Gearbox-in-drum design reduces size and helps the winch fit in compact applications Hydraulic motors offers high torque and high efficiency at low motor speed Easily configured to meet worldwide standards including ANSI/ASME B30.7 and CE FEM Classification 1 Bm Free spool clutch for rapid rope payout (Pullstar winches) To receive a quote for Ingersoll Rand Winches, Kindly email us at sales@mariteksolutions.com Read More "Ingersoll Rand PS2-10000H Series Liftstar and Pullstar Hydraulic Winches"
Ingersoll Rand PS4000H Series Liftstar and Pullstar Hydraulic Winches
Durability Rugged cast iron and steel construction delivers long-life Minimum 18:1 drum diameter to wire rope diameter reduces wire rope wear Safety Lever control allows for precise positioning Built-in handles and compact design make carrying easy (portable) Performance Gearbox-in-drum design reduces size and helps the winch fit in compact applications Hydraulic motors offers high torque and high efficiency at low motor speed Easily configured to meet worldwide standards including ANSI/ASME B30.7 and CE FEM Classification 1 Bm Free spool clutch for rapid rope payout (Pullstar winches) To receive a quote for Ingersoll Rand Winches, Kindly email us at sales@mariteksolutions.com Read More "Ingersoll Rand PS4000H Series Liftstar and Pullstar Hydraulic Winches"