GRUNDFOS CR5-6 A-FGJ-A-E-HQQE CENTRIFUGAL PUMP

GRUNDFOS CR5-6 A-FGJ-A-E-HQQE CENTRIFUGAL PUMP

Specification

  • Manufacturer: Grundfos
  • Model: CR5-6 A-FGJ-A-E-HQQE
  • Type: Centrifugal Pump
  • Condition: New
Categories: ,

Description

Manufacturer: Grundfos

Model: CR5-6 A-FGJ-A-E-HQQE

Serial No: 0414

Type: Centrifugal Pump

Condition: New

 

TECHNICAL SPECIFICATIONS:

Motor standard: IEC

Motor type: 90SB

Rated power – P2: 1.1kW

Mains frequency: 50 Hz

Rated voltage: 1 x 220-230/240 V

Rated current: 7.40/6.70 A

Starting current: 390 %

Rated speed: 2770 rpm

 

Maritek Solutions can supply new and refurbished parts of Grundfos Centrifugal Pump.

To receive a quote for any Marine-Industrial Grundfos Centrifugal Pump, Kindly email us at sales@mariteksolutions.com

Technical Data

The Grundfos CR5-6 A-FGJ-A-E-HQQE is a vertical, multistage centrifugal pump with suction and discharge ports on the same level.

The pump head and base are in cast iron – all other wetted parts are in stainless steel (EN 1.4301).

It is suitable for commercial air conditioning, commercial heating, and commercial water pressure boosting.

The pump speed on which pump data are based is 2789 rpm, and the rated flow is 5.8 m³/h.

The pump has a rated head of 28.7 m and a maximum head of 40.5 m.

The pump has 6 stages and 6 impellers.

The pump requires a power of 1.1 kW.

The pump is approved by CE, EAC, and ACS.

The pump is designed to pump water with a temperature range of -20°C to 120°C.

The pump is rated for a maximum operating pressure of 25 bar.

The pump has a maximum ambient temperature of 40°C.

The pump has a DIN/ANSI/JIS type of connection with a size of inlet and outlet connection of DN 25/32.

The pump has a pressure rating for connection of PN 25.

The flange rating inlet is 250 lb, and the flange size for motor is FT115.

The pump is equipped with a single shaft seal arrangement with code HQQE.

The pump is designed to be installed vertically.

Go to top