The Parkrimp 2 is shipped in two crates.
One crate contains the crimp head (83C-080), and the second contains the stand assembly (83C-S20 or 83C-S40).
Check to make sure you have received the following items:
Qty. Part Number
1 83C-080 Crimp Head Assembly Includes:
1 83C-OCB Adapter Bowl Assembly
1 83C-R02 Spacer Ring
1 83C-R02H Spacer Plate
1 83C-R12 Split Die Ring (Front Half)
4 832180-5 1/2-13 x 2-1/2” Hex Head Bolt
4 832180-6 1/2” Lock washer
4 832180-7 1/2” Hex Nut
1 832181 Hoist Ring
1 842205 Grease
1 4480-T25-US Technical Manual
1 83C-S20 or 83C-S40 Stand Assembly Includes:
1 881612-13 or 881612-14 Receptacle
2 Hose Assemblies
1. Remove crate top and sides from shipping pallets. Unbolt stand from pallet and move to final location for assembly.
2. The crimp head (83C-080) may have been shipped with mounting bracket (832156) rotated to fit crate. Reposition and install 5/8” x 1” bolts with lock washers. Torque the bolts to 100-125 lb-ft.
3. Carefully lift the crimp head from shipping pallet and position on stand. Align four holes in mounting bracket with holes in stand top. Bolt the crimp head to stand with 1/2” x 2 1/2” hex head bolts, lock washers and nuts provided. Torque the nuts to 85-110 lb-ft.
4. Install provided hose assemblies, remove eye bolt and reinstall cylinder guard.
5. Remove the reservoir breather shipping plug.
6. Attach the enclosed breather cap to the reservoir.
7. The crimper has been filled with oil and cycled. Check the oil level in the reservoir prior to start-up. The oil level should be visible in the Sight Gage. Add Enterpac oil if filling is required.
8. Wire the machine in accordance with the requirements of the National Electrical Code.
To receive a quote, Kindly email us at sales@mariteksolutions.com
